Genric Caliper Type Dial Readout Type Dial Indicator Measurement Type Inside,Outside,Depth Material of main functional components (beam, sliding jaw, and depth measuring blade) Stainless Steel Surface Finish Satin Chrome Measurement Range 0-300 mm Least Count / Resolution 0.02 mm Accuracy ± 0.01 mm Jaw Type Knife Edge Jaw Jaw Material Stainless Steel Jaw Length (Outside Jaws) 60 mm Jaw Length (Inside Jaws) 15 mm Jaw Length Tolerance ± 0.1 mm

Specifications Caliper Type Vernier Readout Type Vernier Scale Measurement Type Inside ,Outside ,Depth ,Step Material of main functional components (beam, sliding jaw, and depth measuring blade) Stainless Steel Surface Finish Matte Measurement Range 0-300 mm Least Count / Resolution 0.05 mm Accuracy ± 0.02 mm Jaw Type Standard Flat Jaw Jaw Material Stainless Steel Jaw Length (Outside Jaws) 40 mm

Standard Parameters Conformity to Indian Standard IS 1931:2000 With Latest Amdmnt. Performance Parameters Application of Mill File A Mill file is a tool used to remove fine amounts of material from a workpiece. Types of cuts Single cut Grades of Cuts Smooth Hardness of cutting Portion of files in HRC Min 56 Types of Mill files Parallel Mill Number of Up Cuts per centi meter 12 Availability of Safe Edges Yes The microstructure on the cutting portion of the file shall be uniformly distributed fine nodular carbides in martensitic matrix with no surface decentralization Yes The file shall be well shaped and shall be reasonably straight Yes The file must not have cracks , scales , rust or other manufacturing defects Yes Each file shall be stamped legibly with nominal size ,grade of cut or trade mark on the uncut portion of file Yes Warranty in years 1 Dimensional and Metallic Parameters Material Alloy Steel Length of file in mm 250 Width of file in mm 25 Thickness of file in mm 6 Length of Tang in mm 70 When held near the middle of file length and struck by a piece of steel thre file shall give a clear metallic ring Yes Additional Parameters The teeth on the surfaces and sides shall be uniform Yes Safe edges should be smooth and free from burns Yes File compatible handles must be supplied with files Yes The fie must be given suitable rust preventive treatment before packing Yes File must be individually wrapped in wax paper to avoid damage to the teeth Yes Reports Availability of test report from govt/ NABL/ILAC accredited lab covering all parameters No Test report number , Incase test reports not availabble , put NA NO Test report date, Incase test reports not availabble , put NA NA Name of test lab , Incase test reports not availabble , put NA NA Address of test lab , Incase test reports not availabble , put NA NA Copies of all certifications and test reports to be provided to buyer on demand at time of supplies NA

Generic Confirming to IS 2586 : 1986 (Reaffirmed in 2019) Yes Construction Bench Vice is constructed with a robust cast iron or steel body, fixed and movable jaws, a precision screw spindle, handle, and base, designed to provide strong clamping force and durability for workshop use. Type Fixed Base Bench Vice Manufacturing Process Casted Material of Body, Movable Jaw and Swivel Baseplate Grey Cast Iron as per IS:210 (Grade FG 200) Material of Jaw plates High Carbon Tool Steel as per IS:3749 Material of Screw spindle and handle Steel as per IS:1570 (Part 1) | Designation Fe 410 Material of Spindle Nut Grey Cast Iron as per IS:210 (Grade FG 200) Hardness of Jaw Plates 445 HV to 596 HV / 45 HRC to 55 HRC Features and Performance

Standard Parameters Conformity to Indian Standard IS 1931:2000 With Latest Amdmnt. Performance Parameters Application of Mill File A Mill file is a tool used to remove fine amounts of material from a workpiece. Types of cuts Double cut Grades of Cuts Smooth Hardness of cutting Portion of files in HRC Min 54 Types of Mill files Taper Mill Number of Up Cuts per centi meter 20 Availability of Safe Edges Yes The microstructure on the cutting portion of the file shall be uniformly distributed fine nodular carbides in martensitic matrix with no surface decentralization Yes The file shall be well shaped and shall be reasonably straight Yes The file must not have cracks , scales , rust or other manufacturing defects Yes Each file shall be stamped legibly with nominal size ,grade of cut or trade mark on the uncut portion of file Yes Warranty in years 1 Dimensional and Metallic Parameters Material Alloy Steel Length of file in mm 250 Width of file in mm 25 Thickness of file in mm 5 Length of Tang in mm 60 When held near the middle of file length and struck by a piece of steel thre file shall give a clear metallic ring Yes Additional Parameters The teeth on the surfaces and sides shall be uniform Yes Safe edges should be smooth and free from burns Yes File compatible handles must be supplied with files Yes The fie must be given suitable rust preventive treatment before packing Yes File must be individually wrapped in wax paper to avoid damage to the teeth Yes Reports Availability of test report from govt/ NABL/ILAC accredited lab covering all parameters No Test report number , Incase test reports not availabble , put NA NA Test report date, Incase test reports not availabble , put NA NA Name of test lab , Incase test reports not availabble , put NA NA Address of test lab , Incase test reports not availabble , put NA 00 Copies of all certifications and test reports to be provided to buyer on demand at time of supplies NA

Standards Conformity to Indian Standard IS 7177 :1974 or Equivalent with Latest Amdmnt. Performance Parameters Application Centre punches is used for making distinct impression on steel , brass , aluminium and wood Deep knurling on the body which ensures firm grip Yes Center punch shall be with black phosphate finish Yes Hardness of working end od centre punch in HV 545 Hardness of striking face in HV 385 Punches shall show no signs of chipping , mushrooming or the body being bent or point becoming fractured or blunted Yes Centre Punches shall be given anti rust treatment Yes Centre punches shall be marked with nominal size , trademark Yes Material and Dimensional Parameters Length of centre punch in mm 150 Diameter of Tip of Centre punch in mm 4 Diameter of centre punch body 10 Weight of centre punch in grams 45 Material of Centre punch Alloy steel Reports Availability of test report from central govt/ NABL/ILAC accredited lab covering all parameters No Test report number , incase report not available put NA NA Test report date , incase report not available put NA NA Name of test lab , incase report not available put NA NA Address of test lab , incase report not available put NA NA Copies of all certifications and reports to be provided to buyer on demand at time of supplies No

Generic Description Crimping Tool is a tool used to press or squeeze a connector (like a metal terminal) onto a wire to make a secure electrical or mechanical connection. Construction Crimping Tool is constructed with two handles, a pivot joint, and hardened jaws or dies designed to compress connectors onto wires securely. Crimping Compliance Standrads NA Features and Performance Type Hand Crimping Tool Operating Mechanism Manual Ratching Type of Die Hexagonal Maximum Crimping Capacity or Crimping Area in mm² Upto 25.00 mm² Battery Voltage in Volts (V) NA Battery Type NA Number of Extra Batteries Supplied NA Compressed Air having a minimum pressure of 8 Bar NA Material and Durability Tools are often made from hardened alloy or high-carbon steel for strength and durability with Corrosion-resistant coatings (e.g., black oxide). Service, Warranty, Installation and Commissioning Warranty against Manufacturing defect 1 year from the date of procurement / invoice. Certification / Test Report Agree to provide all relevant documents Test Report/supporting document /reports etc if applicable to the buyer at the time of bidding or on demand Yes

Certification, Testing & Warranty Conformity to IS 959 (Latest) Yes Availability Of Test Report From Central Govt/Nabl/Ilac Accredited Lab To Prove Conformity To Specification No Test Report Number and Date NA Warranty 12 month General Specification Description A soldering iron is a hand tool used in soldering. It supplies heat to melt solder so that it can flow into the joint between two workpieces. Power consumption 125 Watt Bit type Bevel Adjustable temperature No Temperature display No Soldering tip temperature 350 degree Celsius Cord length 2 meter Stand No Tip heating time (in seconds) Upto 60

Generic Technical Specifications and Requirement of the products As Per Bhel Drawing( Attached) Compliance to all clauses of specifications and requirement mentioned in document Yes Technical Specifications Seller has to submit Material test certificate,Dimensional report,hardness report Test Reports Agreed to furnish all the test reports and certificates to buyer / consignee on demand Yes Availability Of Test Report To Prove Conformity of the Product To Specification Manufacturer In House Test

Certification & standard Conformity to Standards I.S.5579 -1985 Technical parameter Tip Width - Tolerance +/- 0.18 mm Blade Diameter 3.1 millimeter Weight 6 gram Tip Width (Tolerance : - 0.18 mm) 4 millimeter Length of Handle 130 millimeter Handle Material Cellular Acetate Plastic Length of Blade 60 millimeter Tip Thickness - Tolerance : ) +/- 0.05 mm Blade Plating Nickel Chrome Material of Blade Silicon-Manganese Steel Hardness on Tip (HRC) 55.1 Tip Thickness 0.5 millimeter Performance Parameter Maximum leakage current (micro ampere) 0.2 Maxmum Voltage for Testing (Direct Current) 500 Volt Minimum Voltage for Testing (Alternating Current) 20 Volt Maxmum Voltage for Testing (Alternating Current) 400 Volt Minimum Voltage for Testing (Direct Current) 60 Volt Generic Color of Handle Yellow Neon filled glow lamp gives a visible glow in normal daylight. Yes Warranty Warranty 1 year Test Report Name and Address of the lab (Please write NA if not applicable) NA Test Report To Be Submitted To The Buyer On Demand NA Test Report Date and Numbers (Please write NA if not applicable) NA Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification No

Standard Parameters Conformity to Indian Standard IS 1931:2000 With Latest Amdmnt. Performance Parameters Application of Mill File A Mill file is a tool used to remove fine amounts of material from a workpiece. Types of cuts Single cut Grades of Cuts Second Hardness of cutting Portion of files in HRC Min 54 Types of Mill files Half Round Number of Up Cuts per centi meter 12 Availability of Safe Edges Yes The microstructure on the cutting portion of the file shall be uniformly distributed fine nodular carbides in martensitic matrix with no surface decentralization Yes The file shall be well shaped and shall be reasonably straight Yes The file must not have cracks , scales , rust or other manufacturing defects Yes Each file shall be stamped legibly with nominal size ,grade of cut or trade mark on the uncut portion of file Yes Warranty in years 1 Dimensional and Metallic Parameters Material 118 T3 Length of file in mm 150 Width of file in mm 20 Thickness of file in mm 5 Length of Tang in mm 55 When held near the middle of file length and struck by a piece of steel thre file shall give a clear metallic ring Yes Additional Parameters The teeth on the surfaces and sides shall be uniform Yes Safe edges should be smooth and free from burns Yes File compatible handles must be supplied with files Yes The fie must be given suitable rust preventive treatment before packing Yes File must be individually wrapped in wax paper to avoid damage to the teeth Yes Reports Availability of test report from govt/ NABL/ILAC accredited lab covering all parameters No Test report number , Incase test reports not availabble , put NA NA Test report date, Incase test reports not availabble , put NA NA Name of test lab , Incase test reports not availabble , put NA NA Address of test lab , Incase test reports not availabble , put NA NA Copies of all certifications and test reports to be provided to buyer on demand at time of supplies NA

Certification & standard Conformity to Standards I.S.5579 -1985 Technical parameter Tip Width - Tolerance +/- 0.18 mm Blade Diameter 3.1 millimeter Weight 6 gram Tip Width (Tolerance : - 0.18 mm) 4 millimeter Length of Handle 130 millimeter Handle Material Cellular Acetate Plastic Length of Blade 60 millimeter Tip Thickness - Tolerance : ) +/- 0.05 mm Blade Plating Nickel Chrome Material of Blade Silicon-Manganese Steel Hardness on Tip (HRC) 55.1 Tip Thickness 0.5 millimeter Performance Parameter Maximum leakage current (micro ampere) 0.2 Maxmum Voltage for Testing (Direct Current) 500 Volt Minimum Voltage for Testing (Alternating Current) 20 Volt Maxmum Voltage for Testing (Alternating Current) 400 Volt Minimum Voltage for Testing (Direct Current) 60 Volt Generic Color of Handle Yellow Neon filled glow lamp gives a visible glow in normal daylight. Yes Warranty Warranty 1 year Test Report Name and Address of the lab (Please write NA if not applicable) NA Test Report To Be Submitted To The Buyer On Demand NA Test Report Date and Numbers (Please write NA if not applicable) Not Available Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification No

GENERAL FEATURES Type Hand Held Display 3.5 digit Backlit LCD Measurement Type True RMS count 4000 MEASUREMENT FEATURES Resistance Measurement Range 100 kiloOhm Resistance Measurement Accuracy (+/-) 1.5 percent Frequency Measurement Range 10 kiloHertz Frequency Measurement Accuracy (+/-) 0.5 percent AC Current Measurement Range 1000 Ampère AC Current Measurement Accuracy (+/-) 1.5 percent AC Voltage Measurement Range 750 Volt AC Voltage Measurement Accuracy (+/-) 2 percent DC Current Measurement Range 100 Ampère DC Current Measurement Accuracy (+/-) 1.5 percent DC Voltage Measurement Range 1000 Volt DC Voltage Measurement Accuracy (+/-) 1.5 percent Other features,if applicable FieldSense™ technolo GENERIC Jaw Size (Dia in Closed State) 34 millimeter Dimensions (H x W x L) (mm x mm x mm) 280x70x45mm Weight 300 gram POWER REQUIREMENTS Power Requirements Battery Operated Type of Battery Non- Rechargeable (Alkaline) if rechargeable , then chemistry of the battery NA if Non-rechargeable , then size of the battery / cell AA Number of non- rechargeable the battery / cell 2 Voltage of rechargeable Battery milliamphere hour 0 Suitable charger/adaptor provided NA OPERATING CONDITION Minimum Operating Temperature -10 degree Celsius Maximum Operating Temperature 50 degree Celsius Operating Humidity (RH) 90 percent SAFETY Safety Certification CE,CSA Safety Rating CAT IV 300 V of IEC 61010 -2-D31 ACCESSORIES Details of the Standard Accessories Supplied with the Equipment Test leads SERVICE Warranty 1 year TEST REPORT DETAILS & TESTS The equipment supplied with calibration certificate yes conformity to Dry Heat for 16 hrs at a specified maximum temp No conformity to Cold Test for 4 hrs at a specified minimum temp in accordance with IS:9000/part-2/section-4/1977 latest No conformity to Damp Heat (Cyclic)Test for 2 Cycles of 24 h each at a temp of 40 degree C & 95% RH No Availability of Test Reports from Central Govt/NABL/ILAC approved accredited lab to prove conformity to the specification No Test Report Number and date for the specification test NA Name and address of the Lab for the specification test NA

Special Terms & Conditions The product may also carry an ISI Mark/Standard Mark as per the BIS standard governing this category. As such, Buyers may also opt for ISI marked products while creating BID by mentioning their requirement in Bid ATC. Availability of License to vendors in this category needs to be checked by Buyer at their end, in case they add any such conditions in Bid ATC. Further, in such cases, buyer shall verify a valid BIS License for the same at the time of evaluation of the BID and check the ISI marking at the time of receipt of the material before issuing CRAC. Generic Requirement Mandatory classification for Full Body Harness (FBH) Class A Optional Attachments for FBH (Choose every class that applies to the offered product) Class D,Class E,Class L,Class P,NA (for no additional attachment) Technical Requirement Design and Construction As per clause 4.3 of IS 3521 (Part 1) Material of Webbing & Yarn Virgin filament Coating Thickness of fittings Chromium plating (8 micron) Packing & Marking Instructions for General Use As per clause 6.1 of IS 3521 (Part 1) Marking & Packing As per clause 6.2 & 6.4 of IS 3521 (Part 1) Certification and Test Reports Agree to provide all relevant documents, Test Report/Supporting document / reports etc. to the buyer on demand after placement of order/ at the time of supply. Yes

Standard Parameters Conformity to Indian Standard IS 1931:2000 With Latest Amdmnt. Performance Parameters Application of Mill File A Mill file is a tool used to remove fine amounts of material from a workpiece. Types of cuts Double cut Grades of Cuts Second Hardness of cutting Portion of files in HRC Min 55 Types of Mill files Blunt Heavy Number of Up Cuts per centi meter 20 Availability of Safe Edges Yes The microstructure on the cutting portion of the file shall be uniformly distributed fine nodular carbides in martensitic matrix with no surface decentralization Yes The file shall be well shaped and shall be reasonably straight Yes The file must not have cracks , scales , rust or other manufacturing defects Yes Each file shall be stamped legibly with nominal size ,grade of cut or trade mark on the uncut portion of file Yes Warranty in years 1 Dimensional and Metallic Parameters Material 118 T3 Length of file in mm 200 Width of file in mm 25 Thickness of file in mm 4.5 Length of Tang in mm 65 When held near the middle of file length and struck by a piece of steel thre file shall give a clear metallic ring Yes Additional Parameters The teeth on the surfaces and sides shall be uniform Yes Safe edges should be smooth and free from burns Yes File compatible handles must be supplied with files Yes The fie must be given suitable rust preventive treatment before packing Yes File must be individually wrapped in wax paper to avoid damage to the teeth Yes Reports Availability of test report from govt/ NABL/ILAC accredited lab covering all parameters No Test report number , Incase test reports not availabble , put NA NA Test report date, Incase test reports not availabble , put NA NA Name of test lab , Incase test reports not availabble , put NA NA Address of test lab , Incase test reports not availabble , put NA NA Copies of all certifications and test reports to be provided to buyer on demand at time of supplies NA

Standard Parameters Conformity to Indian Standard IS 1931:2000 With Latest Amdmnt. Performance Parameters Application of Mill File A Mill file is a tool used to remove fine amounts of material from a workpiece. Types of cuts Double cut Grades of Cuts Second Hardness of cutting Portion of files in HRC Min 55 Types of Mill files Taper Mill Number of Up Cuts per centi meter 13.5 Availability of Safe Edges Yes The microstructure on the cutting portion of the file shall be uniformly distributed fine nodular carbides in martensitic matrix with no surface decentralization Yes The file shall be well shaped and shall be reasonably straight Yes The file must not have cracks , scales , rust or other manufacturing defects Yes Each file shall be stamped legibly with nominal size ,grade of cut or trade mark on the uncut portion of file Yes Warranty in years 1 Dimensional and Metallic Parameters Material Alloy Steel Length of file in mm 200 Width of file in mm 23 Thickness of file in mm 6 Length of Tang in mm 70 When held near the middle of file length and struck by a piece of steel thre file shall give a clear metallic ring Yes Additional Parameters The teeth on the surfaces and sides shall be uniform Yes Safe edges should be smooth and free from burns Yes File compatible handles must be supplied with files Yes The fie must be given suitable rust preventive treatment before packing Yes File must be individually wrapped in wax paper to avoid damage to the teeth Yes Reports Availability of test report from govt/ NABL/ILAC accredited lab covering all parameters No Test report number , Incase test reports not availabble , put NA No Test report date, Incase test reports not availabble , put NA NA Name of test lab , Incase test reports not availabble , put NA NA Address of test lab , Incase test reports not availabble , put NA NA Copies of all certifications and test reports to be provided to buyer on demand at time of supplies NA

Technical Specification Colour Grey Fixing NA (For Straight Shape) Shape Straight Material Steel Corrosion Resistance NA Surface Finish NA Thickness 1.7 millimeter Dimensions Width 1.5 centimeter Height 300 millimeter Length 300 millimeter Packaging Number of scale in a pack 1 Packaging type Box Reports & Certifications Copies of certifications to be furnished to buyer on demand at time of supplies NA ISO Certification Number, Issue date, Validity & If ISO certification not available may indicated N/A NA Test Reports Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification No Test Report to be submitted to the Buyer on Demand No

Performance Parameters Application/Usage Electrician Scissor used for splicing wire, cutting insulation, strippling insulation. Types of Electric Scissor Cable Cutter Material of Electrician Scissor Stainless steel Handle Type of Scissor Bi-tone nylon + TPV Length of the Scissor (in mm) 125-150 Hardness cutting edge of Scissors (HRC) 54 The serrated blade grips the wire to make the cutting easier and better Yes Finish of Electrician Scissor Nickle Plated finish resists corrosion Blade Thickness of Scissor (in mm) 4 Dimensions of Electrician scissor (L x W x H ) in mm x mm x mm 150x8x30 Weight of Electrician scissor in gram 60 Warranty in years 1 Reports ISO certification of manufacturer ISO 9001 2015 ISO certification number and date 1650426019161 DATE-26/04/2018 Availability of test certificate from Government/ NABL/ ILAC accredited lab to prove conformity of specifications No Test certificate number and date ,if no test report available put N/A NA Name and Address of test lab, ,if no test report available put N/A NA Copy of certification & reports shall be furnished to buyer on demand NA , in case test reports not available

Generic Description A screwdriver is a hand tool used for driving or removing screws. It consists of a handle, a shaft, and a tip that fits into the screw head. Governing Specification Generally Confirming to IS 844 Part 1 and IS 844 Part 2 Features and Performance Type Electricians’ Screwdrivers Type of Screwdriver Head Slotted Material of Handle Plastic Hardness 485HV or 48HRC Dimensions Nominal Screwdriver Point Size in mm 0.6 x 4.0 Certification Agree to provide all relevant documents Test Report/supporting document /reports etc if applicable to the buyer on demand Yes

Generic Description Insulated Pliers are hand tools designed with electrically insulated handles to provide protection against electric shock while gripping, cutting, or bending wires. They are commonly used in electrical maintenance and installation work. Features and Performance Product Type Insulated Plier Type of Insulated Pliers Combination Pillers Overall Length in (mm) 200 mm Material of Pilers Carbon Steel Hardness 52–58 HRC Surface Finish Black Phosphate Insulation Type Fully Insulated Handle Insulation Rating 1000V AC (Non-VDE) Handle Material PVC Grip Type Ergonomic Grip Corrosion Resistance Yes With Cutting Edge Yes

Genric Graduation Unit Meter (m) Measuring Length (m) 5 Tape Width (mm) 19 Blade Thickness (mm) 0.10 Blade Material Fibreglass Case Material Plastic Type of Mechanism Cased Tape Measure Type of Winding for Tape Automatic Winding Accuracy Class Class III Locking Mechanism Provided No Strong rivets ensure a firm and durable end hook Yes