Generic Pack of Needle files in each set 12 Contents Barrette Swiss Pattern,Crossing Swiss Pattern,Equaling Swiss Pattern,Flat Swiss Pattern,Half Round Swiss Pattern,Joint Swiss Pattern,Knife Swiss Pattern,Marking Swiss Pattern,Round Swiss Pattern,Slitting Swiss Pattern,Square Swiss Pattern,Three Square Swiss Pattern and Collet style Handle Additional Parameter NA Collet Style handle should allow full interchangeability No Packaging Type Moulded case Plastic screwdriver collet- style handle for holding individual files Yes Length 6 inch Warranty Warranty Period 2 year Test Report/Certification Availability Of Test Report From Central Govt/Nabl/Ilac Accredited Lab To Prove Conformity To Specification No Certification NA Manufacturer Certification NA Test Report Number and Date NA Availability of test certificate on buyer demand NA Name and address of the Lab where Test conducted NA

Generic Cutting edge 25 millimeter Additional Parameter Specially for Metal sheet Type of Cut Right-hand cut Cutting capacity (Cold rolled steel) 1.8 millimeter Cutting capacity (Stainless Steel) 1 millimeter Material Alloy Steel Length 245 millimeter Finish Natural Steel Finish Salient Features Maneuverable for angle cutting or pattern configurations No Maneuverable for angle cutting or pattern configurations in Straight Cut Yes Handle Grip PVC Dipped Safety locking system No Handle Color Any Other Serrated sides for sheet metal holding No Milled, sharpened blades, induction hardened Yes Offset blades allow cut material to flow beneath your hand without curling. Yes Packaging Packaging Type Roll pouch Warranty Warranty Period 1 year Test Report/Certification Certification CE,RoHS,NA Name and address of the Lab where Test conducted NA Test Report Number and Date NA Availability Of Test Report From Central Govt/Nabl/Ilac Accredited Lab To Prove Conformity To Specification No Manufacturer Certification ISO 9001 or latest,NA Availability of test certificate on buyer demand Yes Certification & standard Compliance ASMEB107.24,NA

Performance Parameters Conformity to Standard IS: 9193 - 1988 BIS marked No BIS license number & date , if no BIS licence available put NA NA Purpose of bearing puller It is a tool used to remove bearing sets from a rotating machine shaft or from a blind bearing hole Type of Bearing Puller Three leg bearing pullers. Minimum Twisting Moment (in Nm) 100 Hardness of bearing puller components Leg - 35 HRC (Minimum) , Housing - 35 HRC (Minimum), Central Bolt - 35 HRC (Minimum) at threads & 45 HRC (Minimum) at tip, Plate - 30 HRC (Minimum ) All parts shall be free from cracks, pits, blow holes, seams and other manufacturing defects Yes All part should be protected against rust by plating with chromium or zinc or blackening by suitable process or by any other suitable process Yes Standard Marking Bearing puller should be marked with type,reach,manufacturer`s name, initials and /or recognized trade mark Warranty in years 1 Dimensional & Material Parameter Material of Legs, housing, central bolt and link plates Alloy Steels Nominal Size of Bearing puller able to withstand twisting moment (in mm) 200 Maximum Reach of bearing puller (in mm) 170 Spread Range of bearing puller (mm) 35-200 Thread size for central bolt/three leg housing M16 x 1.5 Thickness of leg in mm 16 Thickness of link plate in mm 7 Dimension of bearing puller (L x W x H) in mm x mm x mm NA Weight of bearing puller in gram 500 Reports ISO certification of manufacturer ISO 9001 2015 ISO certification number and date PICL/QMS/0518/2059 Availability of test certificate from Government/ NABL/ ILAC accredited lab to prove Conformity of specifications No Test certification number and date, if test report not available put NA NA Name and address of test lab, if test report not available put NA NA Copy of Test report shall be furnished to buyer on demand ,in case not available put NA NA

TYPE Type of Temperature Gauge Dial Type Gas Expansion Thermomter Measuring system's fill medium Nitrogen Temperature detecting Element Bourdon Tube Thermometer connection type Flexible capillary type Method of Mounting Surface Mounting Mounting Support NA for 3-hole fixing Process connection / Entry Bottom - Radial End Connection Type Male Nominal Size of End Connector Thread 1/2 inch End Connector Thread Type NPT Gauge Dampening liquid Dry CONFORMITY Conformity to Indian Standard Generally conforming to EN 13190 - latest SIZE / RANGE / ACCURACY Nominal Size of the Dial 150 millimeter Stem Diameter 10 millimeter Stem length 150 millimeter Diameter of the Bulb (May indicate '0' for plain stem) 10 millimeter Capillary length (May indicate '0' for Rigid Stem type) 5000 millimeter Measuring Units Celsius °C Scale Range in Degree Celsius (-) 20 to (+) 150 Scale Interval of the Gauge / Resolution(°C/°F) 2 degree Celsius Accuracy (± % FSD) 1 Over - Range Safety (% FSD) 130 Enclosure Protection Class IP 66 MATERIAL Material of Case & Bezel Stainless Steel, Gr 304 Finish of the case Polished & Buffed Material for detecing element Stainless Steel, Gr 316 Material for End Connector / Shank Stainless Steel, Gr 316 Material of the Stem Stainless Steel, Gr 316 Material of the Capillary Stainless Steel, Gr 304 Material of the Capillary armouring SS 304 Spring armour Material for Dial Plate Aluminium Material for Pointer Aluminium Material for Window Cover Toughened Glass GENERIC Response time 60 second Overall Dimensions (mm x mm x mm) 150x150x70 Net Weight 1700 gram SALIENT FEATURES "Salient Features of the Thermometer (Select applicable features only)" Equipped with Zero Adjustment facility,Equipped with Over - Range Safety Protection THERMOWELL Suitable Thermowell - inclusive in the scope of supply No Thermowell Type NA Thermowell Construction Type NA Thermowell Shank Style NA Thermowell Flange dia (mm) NA Thermowell Flange pressure rating (bar) NA Material of Thermowell NA Thermowell Process connection type NA Thermowell Process connection Size(inch) NA Thermowell Connector Thread Type NA "Thermowell nominal Bore dia (May indicate '0' if Thermowell is not included)" 0 millimeter "Thermowell Bore depth (May indicate '0' if Thermowell is not included)" 0 millimeter "Thermowell insertion depth (May indicate '0' if Thermowell is not included)" 0 millimeter Coating on the outer surface of the Thermowell stem NA Cap and Chain NA Thermowell Overall Dimensions (mm x mm x mm) 0 Thermowell Net Weight 0 gram ACCESSORIES "Accessories inclusive in the scope of supply (Select including accessories only)" NA AMBIENT TEMPERATURE LIMIT / PRESSURE RATING Minimum permissible Ambient Temperature limit at the case 0 degree Celsius Maximum permissible Ambient Temperature limit at the case 50 degree Celsius Pressure rating of stem (max) 15 bar WARRANTY WARRANTY 12 month CALIBRATION Calibration Certificate for each gauge Provided to the buyer along with supplies Yes Calibration Certificate issuing authority OEM Certificate

Construction Torque Range, Nm 70-340 Least Count in Nm 0.5 Swing Arc 0 degree Head Depth 33 millimeter Head Width 38 millimeter Square Drive Size in Inch 1/2 inch Overall Length at min cap 320 millimeter Weight 1.3 kilogram Material Material Steel Grip Material Plastic Additional Information Torque-Limiting Direction Clockwise & Counter Closewise Finish NA Test Report Details Test Report to be submitted to the Buyer on Demand NA Availability of Test Report from Central Govt/NABL/ILAC accredited lab to prove conformity to specification No

Performance Parameters Types of Machine vices Swivel base Nominal size of the Machine Vice ( in mm) 100 Overall Length of the Machine Vice (in mm) 265 millimeter Overall Height of the Machine Vice (in mm) 165 millimeter Overall Weight of the Machine Vice (in Kg) 10 kilogram Clamping range of Machine vice (mm) 0-100 All non-machined portions of the machine vices shall be painted according to procedure laid down in IS 10949 Yes Machine vices shall be coated with a suitable rust preventive coating and packed in such a way as not to be affected by the exposure to atmosphere Yes Warranty (Years) 1 Standards Conformity to Standards IS 4502:1999 BIS marked No If BIS marked Yes indicate BIS lisence number other wise indicate NA NA Material Parameters Material of the base and sliding and fixed jaws Cast iron Material of Spindle screw Steel having a minimum tensile strength of 600 Mpa Material for Spindle nut Phosphor bronze as per grade 1 of IS 28 Material for Jaw inserts Steel, hardened to 620 ± 40 HV (56 ± 2 HRC) Material for jaw inserts shall be rigidly fixed to the jaws of the machine vices Yes Reports Availbility of test certificate from Government/ NABL/ ILAC accerdited lab to prove conformity of specifications No Copy of Test report shall be furnished to buyer on demand NA

Performance Parameters Application/Usage It is hand tool used to check its straightness or correspondence to an adjoining surface at right angle (90 degree) Blade material Stainless Steel Length of Blade of in mm 300 Width of Blade of in mm (with ± 2 mm tolerance) 30 Handle material Rosewood / Beech / Maple Width of the Handle in mm (with ± 5 mm tolerance) 130 Graduations marking should be provided on blade Yes Dimensions of Try Square (L x W x H ) in mm x mm x mm 10 x 10 x x10 Weight of Try Square in gram 200 Warranty in years 1 ISO certification of manufacturer ISO 9001 2015 ISO certification number and date 21-ICA-07-0.31 23/12/2021 Availability of test certificate from Government/ NABL/ ILAC accredited lab to prove conformity of specifications No Test certificate number and date ,if no test report available put N/A N/A Name and Address of test lab, ,if no test report available put N/A N/A Copy of certification & reports shall be furnished to buyer on demand NA, in case no test report available

Generic Application Industrial Performance parameter Number of Batteries supplied (Inclusive in the Scope of Supply) 0 Graduation 0.01 millimeter Hysteresis 5 micrometer Stylus size 4.8 millimeter Range 1 millimeter Dial reading 0-100 Power Source NA Type of Display Analog Material Steel Stylus type NA length 20 millimeter Repeatability 3 micrometer Dial Diameter 58 millimeter Number of Digits in Display 0 Measuring range 10 micrometer Measuring Force 0 Newton Others Weight 298 gram Overall Dimension 81.9X142.3X43 Features Features Jeweled bearing Accessories Accessories inclusive in the scope of supply Carrying case Warranty/Services Time Duration for Repairing /Replace the defect during Warranty Within Two week Warranty 12 month Warranty on spare parts 0 month Contact details of manufacturer, supplier and local service agent are provided NA Installation Scope of supply includes installation, safety and operation checks of the equipment by the supplier before handover Yes Environmental Properties Minimum operating temperature 0 degree Celsius Ingress protection NA Maximum operating temperature 50 degree Celsius Test Report/Certification Calibration Certificate issuing authority OEM certificate Test Report Number and Date NA Copies of reports and certifications to be furnished to buyer on demand at time of supplies NA Availability Of Test Report From Central Govt/Nabl/Ilac Accredited Lab To Prove Conformity To Specification No Name and address of the Lab where Test conducted NA Standard Compliance ISO Calibration Certificate for each Micrometer Provided to the buyer along with supplies Yes Certification NA

TYPE / MATERIAL Type Analog Outside micrometer Anvil Non-removable anvil with flat measuring face Shape of the Spindle end Flat Spindle end tipped with tungsten carbide No PERFORMANCE Measurement Range (mm) 0-25 Least Count / Resolution 0.0001 millimeter Accuracy (Maximum error in reading) at 20 deg C (±) 0.0005 millimeter DISPLAY / DATA OUTPUT Type of Display Graduated Scale "Number of Digits in Display (May indicate '0' for Analog type micrometer)" 0 "Display digit Size (May indicate '0' for Analog type micrometer)" 0.1 millimeter Data Output to other devices No BATTERY Power Source NA for Analog type micrometer Battery Size, if Non Rechargeable Battery NA for Analog type micrometer Battery Chemistry NA for Analog type micrometer Number of Batteries required for operation (May Indicate '0' for Analog type micrometer)" 0 Number of Batteries supplied (Inclusive in the Scope of Supply) (May Indicate '0' for Analog type micrometer) 0 Battery Life (Approx) under normal use (May Indicate '0' for Analog type micrometer)" 0 year SALIENT FEATURES / FUNCTIONS salient Features / Functions Spindle Lock ACCESSORIES Standard accessories inclusive in the scope of supply Screw Driver GENERIC Material of the Frame Stainless Steel Material of the Spindle and Anvil Hardened Stainless Steel Quality of the main parts of micrometer such as Spindle, Anvil, Barrel, Thimble, Ratchet drive etc Generally conforming to IS: 2967 (latest) for metallic parts Finish Polished Weight 800 gram Dimensions (mm x mm x mm) 120X120X120X Additional features, if any NA List of Items and Quantity of each item included in the offer NA OPERATING CONDITIONS / INGRESS PROTECTION Minimum Operating Temperature 0 degree Celsius Maximum Operating Temperature 60 degree Celsius Maximum Operating Humidity at 40 deg C (Rh) 80 percent Ingress Protection NA WARRANTY Warranty 2 year CALIBRATION Calibration Certificate for each Micrometer Provided to the buyer along with supplies Yes Calibration Certificate issuing authority NABL / ILAC accredited agency

Generic Product Type Interchangeable Rod Type Measurement Type Analog Item Depth Micrometer Performance Parameters Flatness of reference face 1.3 micro-m Graduation/Resolution, mm 0.01 Parallelism between reference face and measuring rod face (4+R/50) micro-m, R=Max. measuring length(mm) No. of Rods 1 Base 63.5 x 16 mm Flatness of measuring rod face 0.3 micro-m Accuracy (Excluding quantizing error) +/- 3 Micro-m Measurement Range, mm 0-25 Measuring Rod Diameter 4 millimeter Battery Information Number of Batteries supplied (Inclusive in the Scope of Supply) NA for Analog type micrometer Battery Life (Approx) under normal use, year NA for Analog type micrometer Battery Chemistry NA for Analog type micrometer Battery Size, if Non Rechargeable Battery NA for Analog type micrometer Number of Batteries required for operation NA for Analog type micrometer Power Source NA for Analog type micrometer Additional Information Salient Features Ratchet stop provides constant measuring force Ingress Protection NA Type of Display Graduated Scale Optional Accessories NA Standard accessories inclusive in the scope of supply Carrying Case Warranty/Service Warranty 1 year Calibration Calibration Certificate issuing authority OEM Certificate Calibration Certificate for each Micrometer Provided to the buyer along with supplies Yes

TYPE Type of Gauge Pressure Gauge Gauge Service Classification Hydraulic Pressure Gauge Type of Pressure Element Bourdon Tube Shape of Pressre Element C - Type Method of Mounting Direct Mounting Mounting Support Flange Process connection Bottom End Connection Type Male Nominal Size of End Connector Thread(inch) 1/4 Thread Type NPT CONFORMITY Conformity to Indian Standard Generally conforming to IS: 3624 - latest SIZE / RANGE / ACCURACY Nominal Size of the Dial 50 millimeter Measuring Units mbar Measurement Range (kg/cm2) 0 to 1.0 Measurement Range (Bar) 0 to 1.0 Measurement Range (millibar) 0 to 25 Measurement Range (kPa) 0 to 600 Measurement Range (MPa) 0 to 1.0 Measurement Range (PSI) 0 to 1000 Scale Interval of the Gauge / Resolution 0.005 Number of Minor Divisions in the scale 32 Accuracy Class 0.25 Enclosure Protection Class IP 54 Maximum Working Pressure 1000 bar MATERIAL Material of Case & Bezel Stainless Steel, Gr 304 Material for Pressure element Phosphor Bronze Material for Movement component Brass Material for End Connector / Shank Stainless Steel, Gr 304 Material for Dial Plate Aluminium Material for Pointer Aluminium Material for Window Cover Toughened Glass GENERIC Zero Adjustment facility No Over - Range Safety Protection No If 'Yes', Over - Range Safety (% FSD) 130 Blow-out device No Dampening liquid Liquid glycerine Overall Dimensions (mm x mm x mm) 28X47X50 Net Weight 1.8 gram TEMPERATURE Minimum Ambient Temperature -20 degree Celsius Maximum Ambient Temperature 55 degree Celsius Maximum Medium Temperature 80 degree Celsius WARRANTY WARRANTY Warranty on Equipment 2 year CALIBRATION Calibration Certificate for each gauge Provided to the buyer along with supplies YES Calibration Certificate issuing authority NABL / ILAC approved agency

Specifications Diameter 2.56 inch Accuracy Vernier +/- 5 minute Finish Stain Chrome Number of Arms 1 Dial Graduation 1 degree Numeric Increments 10 degree,30 minute Maximum Angle Measuring 360 degree Vernier Graduation -0.083 degree to +0.083 degree Material Stainless Steel Additional Information Includes Magnifier Accessories NA Packaging Container Material Plastic Container Case Certification & Standards Calibration Certificate provided by supplier Yes Certifications & Standards ISO 9001 certified Yes Test Report Details Test Report to be furnished to the Buyer on demand( Must be declared, write NA if Test Report is not available) N/A Availability of Test Report from Central Govt/ State Govt/NABL/ILAC accredited lab(hint: Must be declared) No

Specifications Diameter 2.56 inch Accuracy Vernier +/- 5 minute Finish Stain Chrome Number of Arms 1 Dial Graduation 1 degree Numeric Increments 10 degree Maximum Angle Measuring 360 degree Vernier Graduation 5 minute Material Stainless Steel Additional Information Includes Magnifier Accessories NA Packaging Container Material Plastic Container Case Certification & Standards Calibration Certificate provided by supplier No Certifications & Standards ISO 9001 certified Yes Test Report Details Test Report to be furnished to the Buyer on demand( Must be declared, write NA if Test Report is not available) N/A Availability of Test Report from Central Govt/ State Govt/NABL/ILAC accredited lab(hint: Must be declared) No

Performance Parameters Application/Usage Pipe Cutter are hand-held cutting tool used to cut small diameter pipe Material which can be cut Aluminium,PVC Type of Pipe cutter Ratchet Cutting Action Material of body of Pipe Cutter Steel Length of the Pipe Cutter in mm 150-250 Cutting Capacity of Cutter (in mm) up to 25 Material of the Blade cutting Stainless Steel Good grip handle design should be provided Yes Operated by one hand Yes Blades should be open smoothly and evenly Yes Dimensions of pipe cutter (L x W x H ) in mm x mm x mm 150 x 75 x 300 Weight of pipe cutter in gram 17 Warranty in years 2 Reports ISO certification of manufacturer ISO 9001 2015 ISO certification number and date FM65410 & 16.11.2018 Availability of test certificate from Government/ NABL/ ILAC accredited lab to prove conformity of specifications No Test cerificate number and date ,if no test report available put N/A NA Name and Address of test lab, ,if no test report available put N/A NA Copy of certification & reports shall be furnished to buyer on demand NA in case no test reports available

Standard Parameter Conformity to Standard As per IS:4123 1982/95 with latest amendment BIS marked No If BIS marked Yes indicate BIS licence number otherwise put N/A NA Performance Parameter Purpose It is used to turn threaded pipe and pipe fittings for assembly (tightening) or disassembly (loosening) by holding pipe outer diameter in metallic chain Type of wrenches Chain Pipe Wrenches Capacity Range in mm 10 - 60,15 - 90,27 - 115,35 - 165,50 - 220,50 - 300 Minimum Hardness of Jaws 450 HV Handle grip test torque in N-m 300,550,900,1550,1800,2100 Breaking load of Chain in Newton 3500,3600,4000,4500,6000 Warranty in years 1 Number of sets of nut & bolt for assemble /disassemble chain provided 2 Handle should be made in single solid piece Yes Jaws should be forged to shape & teeth not slip over pipe surface Yes Chain pipe wrenches finishing It shall be free from manufacturing defect ,flaws cranks,rust,burrs etc. Chain shall be properly lubricated with greased or high viscosity oils Yes Marking on Chain pipe wrenches The chain pipe wrenches shall be marked with capacity,manufacturer name and or trade mark Dimensional & Material Parameter Nominal Size in mm 100 Total Length (with tolerance ± 10) in mm 920 Minimum Jaw Length in mm 170 Minimum Width of Jaw in mm 60 Minimum Diameter of Handle in mm 22 minimum Thickness of Jaws in mm 9.5 Minmum Length of Chain in mm 975 Minimum Pitch of Chain in mm 19.05 Material of Handle Carbon Steel Material of Jaws 35C4 Carbon Steel Material of Bolts 35C4 Carbon Steel Weight of Chain Pipe wrenches in kg 4.7 Reports ISO certification to manufacturer No ISO certification Number and Date and if no ISO certification available put NA NA Availability of test report from central Govt/ NABL/ILAC accredited lab covering all parameters No Test Report Number, If no test report available put NA NA Test report date NA Name of the test lab NA Address of test lab NA Copies of test Reports/certificates and other certifications to be furnished to buyer on demand at time of supplies No

Performance Paramteres Types of Wrenches Type A Grade of Wrenches Heavy duty Nominal size of Wrenches (length in mm) 375 The opening of jaws shall be easily and conveniently adjustable at any opening up to the maximum opening of wrench and shall remain in the required position till further adjustment Yes The Worm shall rotate freely and the jaw shall slide smoothly for the entire range of the wrench Yes Wrenches shall not have forging defects, such as over heating, unfilling, scales, pits, laps and cracks Yes Incase of cast iron wrenches, the casting shall be of uniform quality and reasonably smooth finish free from casting defects, such as blow holes, porosity, shrinkage, cold shut and cracks NA for Heavy duty and Normal duty wrenches All parts of the wrenches shall be adequately protected against corrosion and rust Yes Tolerence on Width across Flats shall be as per IS 6149 Yes Wrenches (Spanners) shall be finished smooth all over and sharp corners shall be removed Yes Wrenches (spanners) and sockets shall be free from burrs, cracks, seams or other manufacturing defects Yes Warranty (Years) 1 The adjustable wrenches shall be clearly and legibly marked nominal width across flats and manufactures intials or trade mark or both Yes Standards Conformity to IS: 6131 (1980) for technical requirements for Hand operated wrenches and IS: 6149 (1984) Adjustable Single-ended open jaw wrenches (Spanners) Yes BIS marked No If BIS marked Yes indicate BIS lisence no other wise indicate NA NA Dimensional and Material Parameters Material Chrome-molybdenum steel bars conforming to IS : 963-1958 (for heavy duty wrenches) Material for adjustable Jaws Steel conforming to Designation 45 C8 of IS : 1875-1978 Finish/Coating of wrenches Phosphate Coating Maximum opening of adjustable jaw (mm) + Tolerance(3 mm) 41 Weight of Wrenches in gms 950 gram Reports Availbility of test certificate from Government/ NABL/ ILAC accerdited lab to prove confirmity of specifications No Copy of Test report shall be furnished to buyer on demand NA

Standard Performance Conformity to Standard As per IS 16176 : 2014 with latest amendments BIS marked No If BIS marked Yes indicate BIS licence number otherwise put N/A NA Performance Parameter Purpose It is a mechanical device used to cut taper external threads on pipes by allowing rotary motion in one direction during threading while freely moving in the opposite direction Suitability for Pipe Carbon Steel Pipe Thread Type BSPT (British Standard Pipe Taper) Hardness of Chaser 58 to 62 HRC for tool & die steel for Carbon Steel Pipe Thread per Inch (TPI) others Number of Chasers others Warranty in years 3 The die head body should be octagonal or ribbed or geared in shape onside to fit its counter part in ratchet handle Yes Ratchet mechanism shall be reversed for the purpose of unscrewing of die from the pipe after threading Yes Provision of locking pin for ratchet action Yes Ratchet pipe threader should be in smooth finishing & free from manufacturing defect ,flaws cranks,rust,burrs etc Yes Ratchet pipe threader should be marked with manufacturer name and or trade mark Yes Ratchet pipe threader should be coated with suitable rust proofing material Yes Dimensional & Material Parameter Nominal Size in Inch 2 Minimum Die Head Bore Size in mm others Maximum Die Head Diameter in mm others Length of Die Head in mm 65 Die Head Collar thickness in mm others Material for Die head Body & Ratchet Handle body Cast Iron of Grade FG210 or SG 450/10 or SG 500/7 Cup Material Grade SG 450/10 or SG 500/7 or Grade 1 or 2 or Grade CR1/ CR2/ CR3 Steel Chaser Material Tool & die Steel for Carboon Steel Pipe Lock pin Material 40C8 Cabon Steel Minimum Gauge length of thread in mm 11.4 Minimum Chaser Thickness in mm 5.3 Maximum Chaser Height in mm 20 Maximum Diameter of Handle body in mm 95 Maximum Inner die of Handle body in mm 55 Minimum Thickness of Handle Body in mm others Handle Height in mm 125 Minimum Diameter of Lever in mm others Length of Lever in mm 455 Gripping Length in mm others Weight of Ratchet pipe threader in kg 2 Reports ISO certification to manufacturer No ISO certification Number & issued date, If ISO certificate not available then put NA NA Availability of test report from central Govt/ NABL/ILAC accredited lab covering all parameters No Test Report Number, If no test report available put NA NA Test report date NA Name of the test lab NA Address of test lab NA Copies of test Reports/certificates and other certifications to be furnished to buyer on demand at time of supplies No

Generic Technical Specifications and Requirements of the product As per buyer requirement All specifications and requirements have been seen and understood Yes Technical Specifications No. of Flutes 3 Cutting Direction Left Hand Designation M20 Nominal Diameter 20 millimeter Ground Thread Taps Type Straight Fluted Material High Speed Steel Pitch 2 millimeter Pitch Type Coarse Standard Mark BIS License Number (CM/L Number) (Hint * - Write NA if not applicable) NA ISI Marked No Packing and Marking Quantity per set 3 Packing and marking shall be As per IS: 6171 Miscellaneous Parameters Guarantee/Warranty Period 1 year Additional Info None Certification and Test Reports Availability Of Test Report To Prove Conformity of the Product To Specification NA Agreed to furnish all the test reports and certificates to buyer / consignee on demand NA

Generic Confirming to IS 2586 : 1986 (Reaffirmed in 2019) Yes Construction Bench Vice is constructed with a robust cast iron or steel body, fixed and movable jaws, a precision screw spindle, handle, and base, designed to provide strong clamping force and durability for workshop use. Type Fixed Base Bench Vice Manufacturing Process Fabricated Material of Body, Movable Jaw and Swivel Baseplate Structural Steel Flats as per IS:226 Material of Jaw plates High Carbon Tool Steel as per IS:3749 Material of Screw spindle and handle Steel as per IS:1570 (Part 1) | Designation Fe 410 Material of Spindle Nut Grey Cast Iron as per IS:210 (Grade FG 200) Hardness of Jaw Plates 445 HV to 596 HV / 45 HRC to 55 HRC Features and Performance Nominal Size of the Vice ( in mm) (Tolerance ±5mm) 150 mm Minimum Mass of Fixed Base Bench Vice, Swivel Base Bench Vice (in kg) 15.5 Kg

Generic Pack of Needle files in each set 6 Contents Barrette Swiss Pattern Additional Parameter NA Collet Style handle should allow full interchangeability No Packaging Type Vinyl Pouch Plastic screwdriver collet- style handle for holding individual files Yes Length 5 inch Warranty Warranty Period 1 year Test Report/Certification Availability Of Test Report From Central Govt/Nabl/Ilac Accredited Lab To Prove Conformity To Specification No Certification NA Manufacturer Certification NA Test Report Number and Date NA Availability of test certificate on buyer demand NA Name and address of the Lab where Test conducted NA

TYPE / MATERIAL Type Analog Outside micrometer Anvil Non-removable anvil with flat measuring face Shape of the Spindle end Flat Spindle end tipped with tungsten carbide No PERFORMANCE Measurement Range (mm) 0-50 Least Count / Resolution 0.01 millimeter Accuracy (Maximum error in reading) at 20 deg C (±) 0.01 millimeter DISPLAY / DATA OUTPUT Type of Display Graduated Scale "Number of Digits in Display (May indicate '0' for Analog type micrometer)" 0 "Display digit Size (May indicate '0' for Analog type micrometer)" 25 millimeter Data Output to other devices No BATTERY Power Source NA for Analog type micrometer Battery Size, if Non Rechargeable Battery NA for Analog type micrometer Battery Chemistry NA for Analog type micrometer Number of Batteries required for operation (May Indicate '0' for Analog type micrometer)" 0 Number of Batteries supplied (Inclusive in the Scope of Supply) (May Indicate '0' for Analog type micrometer) 0 Battery Life (Approx) under normal use (May Indicate '0' for Analog type micrometer)" 0 year SALIENT FEATURES / FUNCTIONS salient Features / Functions Stem Lock Nut,Spindle Lock,Zero-setting ACCESSORIES Standard accessories inclusive in the scope of supply instruction booklet,Carrying Case GENERIC Material of the Frame Stainless Steel Material of the Spindle and Anvil Hardened Stainless Steel Quality of the main parts of micrometer such as Spindle, Anvil, Barrel, Thimble, Ratchet drive etc Generally conforming to IS: 2967 (latest) for metallic parts Finish Polished Weight 260 gram Dimensions (mm x mm x mm) 175X70X23 Additional features, if any NA List of Items and Quantity of each item included in the offer NA OPERATING CONDITIONS / INGRESS PROTECTION Minimum Operating Temperature 0 degree Celsius Maximum Operating Temperature 50 degree Celsius Maximum Operating Humidity at 40 deg C (Rh) 90 percent Ingress Protection NA WARRANTY Warranty 1 year CALIBRATION Calibration Certificate for each Micrometer Provided to the buyer along with supplies Yes Calibration Certificate issuing authority NABL / ILAC accredited agency

TYPE / MATERIAL Type Digital Outside micrometer Anvil Non-removable anvil with flat measuring face Shape of the Spindle end Flat Spindle end tipped with tungsten carbide Yes PERFORMANCE Measurement Range (mm) 175-200 Least Count / Resolution 0.001 millimeter Accuracy (Maximum error in reading) at 20 deg C (±) 0.004 millimeter DISPLAY / DATA OUTPUT Type of Display LCD "Number of Digits in Display (May indicate '0' for Analog type micrometer)" 4 "Display digit Size (May indicate '0' for Analog type micrometer)" 4 millimeter Data Output to other devices No BATTERY Power Source Alkaline Batteries (Non-Rechargeable) Battery Size, if Non Rechargeable Battery LR44 Battery Chemistry Li-ion Number of Batteries required for operation (May Indicate '0' for Analog type micrometer)" 2 Number of Batteries supplied (Inclusive in the Scope of Supply) (May Indicate '0' for Analog type micrometer) 1 Battery Life (Approx) under normal use (May Indicate '0' for Analog type micrometer)" 2 year SALIENT FEATURES / FUNCTIONS salient Features / Functions Inch / Metric conversion,Manual ON/OFF ACCESSORIES Standard accessories inclusive in the scope of supply Spanner GENERIC Material of the Frame Stainless Steel Material of the Spindle and Anvil Hardened Stainless Steel Quality of the main parts of micrometer such as Spindle, Anvil, Barrel, Thimble, Ratchet drive etc Generally conforming to IS: 2967 (latest) for metallic parts Finish Polished Weight 220 gram Dimensions (mm x mm x mm) 0 Additional features, if any NO List of Items and Quantity of each item included in the offer NO OPERATING CONDITIONS / INGRESS PROTECTION Minimum Operating Temperature 0 degree Celsius Maximum Operating Temperature 55 degree Celsius Maximum Operating Humidity at 40 deg C (Rh) 75 percent Ingress Protection IP65 WARRANTY Warranty 1 year CALIBRATION Calibration Certificate for each Micrometer Provided to the buyer along with supplies Yes Calibration Certificate issuing authority OEM Certificate

GENERIC Display type 7 segment Red LED display Maximum display 4 digits to indicate PF Resolution 0.001 PF Case/Housing material ABS No. of Phase/Element/Wire 3 Phase, 1 Element, 4 Wire Input voltage 440 V Input current 0 to 5A, AC Input frequency 50/60 Hz Classification (Accuracy) 0.5 Size of the meter ( in mm x in mm) 96 x 96 IP prtoection class (as per IS/IEC:60529:2001) IP 54 Operating temeprature 0 to 50 deg C Humidity range Upto 95% (RH) non condensing CERTIFICATION CE Certification Yes EMC complaince Yes Availability of Type Test Report from Central Govt./NABL/ILAC accredited lab to prove conformity to specification Yes Test report number HEPL/2019/04/88 Test report date 18/04/2019 Name of lab HIMANCHALENERPVTLTD Address of lab JABLI,HP All the test reports shall furnish to the buyer/consignee on demand Yes

Generic Description A screwdriver is a hand tool used for driving or removing screws. It consists of a handle, a shaft, and a tip that fits into the screw head. Governing Specification Generally Confirming to IS 844 Part 1 and IS 844 Part 2 Features and Performance Type Electricians’ Screwdrivers Type of Screwdriver Head Slotted Material of Handle Plastic Hardness 485HV or 48HRC Dimensions Nominal Screwdriver Point Size in mm 0.6 x 4.0 Certification Agree to provide all relevant documents Test Report/supporting document /reports etc if applicable to the buyer on demand Yes